Bucatini / 40 mm / 360° / IP65
The big gesture.
Thick, bold, built for scale.
10 px/m, 100 mm pitch, 28.8 W/m max. When the line needs weight and has to read from the back of the room.
Bucatini 40 mm / 1 m sample
Drag to turn, scroll or pinch to zoom.
The 3D view needs WebGL. The picture above is a frame of it; every number is in the sheet below.
Size
Shape
Look
Rendered to the real numbers: diameters, pixel pitch, 28 mm steel end caps, NL4 feed. Spaghetti's minimum bend is 2 in (50 mm) to centerline. Angel Hair and Bucatini bends are checked per shape, so ask. The Inside view is an illustrative section of the construction: solid diffused silicone around a double-sided PCB. Need the geometry in your own software? The design kit has GDTF, STEP, OBJ and GLB.
- Pixels per m
- 10
- Pixel pitch
- 100 mm
- Power, max
- 28.8 W/m
- Ingress
- IP65
| Diameter | 40 mm |
|---|---|
| Emission | 360° |
| Profile | Round, diffused silicone, steel end caps both ends |
| Ingress rating | IP65 |
| Minimum bend radius | Bend check per shape. The bigger tube wants a bigger radius; send us the drawing. |
| Pixels | WS2811 RGB, SMD 5050, 6 LEDs per pixel, 10 px/m, 100 mm pitch |
| Cut increment | 100 mm (custom lengths cut on the pitch) |
| Input | 24 VDC, 28.8 W/m max, 1.2 A/m at full white |
| Max run per output | 10 m: 100 px, 300 ch, 1 universe |
| Connections | NL4 both ends, 18/3 or 16/3 SJOOW feeders |
| Rental lengths | 3 / 5 / 10 m, custom on request |
| Rigging | Rigging rings in pairs: one each end, one every 4 to 5 m |
| Control | KG3 PXL CTRL (sACN / Art-Net / DMX) or KG3 Magic Controllers (WLED) |
Full 360 degree emission with the widest body in the range, so the line stays fat from every angle. Power figures are maximums at full white. No UL claims, no brightness claims we have not measured.
Stock lengths, ready to patch.
One output and one universe per run. Need another length? The run calculator does any length in m or ft.
| Run | Pixels | Channels | Universes | Power, max | Current at 24 V |
|---|---|---|---|---|---|
| 1 m | 10 | 30 | 1 | 28.8 W | 1.2 A |
| 3 m | 30 | 90 | 1 | 86.4 W | 3.6 A |
| 5 m | 50 | 150 | 1 | 144 W | 6 A |
| 10 m | 100 | 300 | 1 | 288 W | 12 A |
Spec Bucatini when
- Arena and amphitheater scale
- Big sweeps, sculpture and outlines that have to read from far away
- A bold line next to video and strobes without disappearing
- Floor pieces and set dressing that get looked at up close
Not sure? Tell us the look and the room and we will tell you which size and how to bend it: info@kg3.io.
Draw it in.
GDTF fixture with modes for 1, 3, 5 and 10 m runs, plus STEP, OBJ and GLB straight runs with steel end caps. Vectorworks, Capture, grandMA3 and any GDTF app. Setup notes for each app are on the design kit page.